Machining centre CNC with 4 controlled axes, used for the working of bars or aluminium, PVC, light alloys in general and steel pieces up to 2 mm. Automatically positioned clamp unit. All models can operate in single piece and multi piece mode, with a single work area for bars up to 7.7 m in length. The PHANTOMATIC X6 and PHANTOMATIC X6 HP models allow machining in pendular mode, with two independent machining areas. The PHANTOMATIC X6 HP version, with 2 supplementary axes to position the clamps and the reference stops allows operation in dynamic pendular mode, carrying out clamps positioning while the machine is working. It has an 8 place tools storage, on the on X axis truck, with the possibility of hosting an angular units and one milling disc, to perform machining on the 5 sides of the piece. The 4th CN axis allows the electro spindle to continuously rotate to from 0° to 180° to perform the work on the profi le edge.

Electronic unit with graphic display for simpler and more intuitive use of program, with graphic images of shapes to be produced and possibility of programming a sequence of processing operations on three sides. X and Y axis movement with brushless motors and high-precision gears, both fitted on racks with zero-play helical teeth. Worktable with controlled pneumatic rotation from -90° to 0 to +90°.

Worktable height: 850 mm. Tool lubrication with adjustable spray. Maximum safety of use thanks to hold-to-run selectors and operation buttons. Nr. 4 horizontal

pneumatic clamps adjustable along worktable. Double operating pressure with safety valves. Automatic tool diameter correction by software. Milling capacity at 90°:

Electronic double-head cutting off machine with automatic movement of the mobile head through a C.C. motor controlled by numerical control. Pneumatic management of all angles up to 22°30’ (external). 450 and 500 mm-blade. Available with a useful cut of 4, 5, 6 m in length.

TECHNICAL CHARACTERISTICS

Air supply:

Nominal pressure 7 bar Maximum pressure 10 bar Electric supply:

Voltage 220-230 V

Frequency 50 Hz

Working data:

Maximum crimping force 3500 Kgp Knife operating stroke 12 mm Bracing clamp stroke 120 mm Maximum crimping height 120 mm Horizontal operating range 40 mm Dimensions:

Maximum height 1150 mm Width 880 mm

Horizontal end milling machine with manual feed. Milling of intermediate angles, +45°

/ 90° / -45°. Quick cutter change with pneumatic control. Scratch-proof work table. Fully guarded work zone.

TECHNICAL DETAILS

Three or single-phase motor : HP 4 Blade shaft revolutions : 3000 Rpm. Motor transmission : direct

Angle cutting : 0° – 45° Lubricant pump oil

Carbide blade (option) : 450 mm. 0 Machine weight : kg. 250

Machine dimensions

The Edwards 40 Ton JAWS Ironworker has the tools to get the job done. Standard features include a Punch Assembly with Pedestal Die Table, 10″ wide Flat Bar Shear, Angle Shear and a universal open tooling station to accept optional Tooling Accessories.

Multiply the utility of your 40 Ton by adding the optional Hydraulic Accessory Pack and your Ironworker becomes the power source for our expanding line of innovative Hydraulic Accessory Tools such as the 10 Ton Tube/Pipe Bender, 20 Ton Shop Press and 40 Ton Shop Press.

Large cutting range despite compact design

Copy routing using side stops or templates at a ratio of 1:1  Pneumatic tracer point with two levels for 2 different cutter diameters

Our patented copy lever suspension ensures precision routing with a minimum of effort

The table height is adjustable to accommodate very high profiles of up to 400 mm (optionally, 600 mm)

The “Spindle Lock” feature makes tool changing easy Pneumatic material clamping

Pulsed coolant system

Screw compressor is a kind of high-speed rotary positive displacement compressor, where the gas is compressed through a pair of grooved rotors meshing with each other and rotating to periodically vary the volume of rotor grooves. Without any other moving parts, only two high-speed rotary rotors are concerned. It features compact size, light weight，smooth running, few vulnerable parts, high efficiency, high single- stage compression ratio and stepless capacity regulation.